- Toothbrush[3]
- Toothpaste[2]
- Water Treatment[2]
- Drying Equipment[1]
- Mixing Equipment[6]
- Other Chemical Equipment[2]
- Other Food Processing Machinery[2]
- Pet Food Processing Machinery[1]
- Snack Machinery[1]
- Conveyors[2]
- Other Machinery[1]
- Plastic Blowing Machinery[3]
- Plastic Crushing Machinery[2]
- Plastic Extruders[3]
- Plastic Injection Machinery[6]
- Other Refrigeration & Heat Exchange Equipment[1]
- Lids[1]
- Other Packaging Materials[1]
- Packaging Boxes[3]
- Packaging Tube[6]
- Plastic Tubes[1]
- Contact Person : Mr. So Nick
- Company Name : Guangzhou Sunway Industrial Co., Ltd.
- Tel : 86-20-36012946,15915817094
- Fax : 86-20-36011028
- Address : Guangdong,Guangzhou,NO. 8-10, Longgang Road, Longgui, Taihe Town, Baiyun District
- Country/Region : China
- Zip : 510445
Related Product Searches:Injection Molding Machine,High Quality,Injection molding machine, plastic injection molding machine,B.SJ-I
Model | Unit | B.SJ680*1 (B) | B.SJ1380*1 (B) | B.SJ1080*1 (B) | B.SJ1680*1 (B) | B.SJ2180*1 (B) | B.SJ2680*1 (B) | B.SJ3680*1 (B) | B.SJ3880*1 (B) |
Screw Diameter | mm | 30 | 38 | 36 | 45 | 50 | 55 | 65 | 75 |
Screw L/D Ratio | L/D | 21 | 21.6 | 21 | 21 | 21 | 21 | 21 | 20.5 |
Shot size | CM³ | 88 | 227 | 165 | 358 | 152 | 653 | 1082 | 1599 |
Injection weight | g | 80 | 206 | 150 | 326 | 411 | 595 | 993 | 1455 |
Injection rate | g/s | 82 | 118 | 95 | 137 | 165 | 229 | 338 | 400 |
Plasticizing capacity | g/s | 8.9 | 18.2 | 16 | 21.7 | 26.9 | 31.6 | 52.2 | 49.8 |
Injection pressure | Mpa | 184 | 172 | 183 | 169 | 178 | 169 | 182 | 156 |
Screw speed | r/min | 255 | 220 | 220 | 200 | 190 | 180 | 165 | 150 |
Clamp tonnage | KN | 680 | 1380 | 1080 | 1980 | 2180 | 2680 | 3680 | 3880 |
Space between tie bars | mm | 310*310 | 410*410 | 375*375 | 460*460 | 515*515 | 575*575 | 660*660 | 720*720 |
Max.mold height | mm | 320 | 420 | 380 | 500 | 530 | 600 | 700 | 850 |
Min.mold height | mm | 120 | 150 | 150 | 180 | 200 | 230 | 350 | 280 |
Ejector stroke | mm | 75 | 110 | 100 | 130 | 130 | 140 | 150 | 180 |
Ejector tonnage | KN | 33 | 33 | 33 | 45 | 71 | 71 | 126 | 126 |
Max.pump pressure | Mpa | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
Pump motor power | kw | 9 | 13 | 11 | 15 | 18.5 | 22 | 37 | 37 |
Heater power | kw | 5.2 | 6.1 | 5.9 | 9.3 | 14 | 16 | 20.4 | 23.5 |
Machine dimensions (L*W*H) | m | 3.9*1.0*1.65 | 4.5*1.35*1.75 | 4.2*1.3*1.75 | 5.2*1.35*1.9 | 5.2*1.62*2.1 | 5.81*1.8*2.1 | 7.5*1.9*2.4 | 8.1*2.1*2.9 |
Machine weight (appoximate) | t | 2.5 | 3.4 | 3.25 | 5 | 6.8 | 8.1 | 13 | 17 |
Injection molding machine applies high responsive proportional variable pump system to replace the traditional 3-way proportional valve control and flow mode, thus to enable tile high match of power between hydraulic output and machine effective operation which avoids energy loss from high pressure throttle, flow, compared with normal constant pump drive machine, the variable pump drive machine is able to save power 30% -40%. In addition, the lower heating power of the machine enables save of cooling water by 30%, debasing peripheral noise and extension of service life of hydraulic sealing part sand oil to minimize operation and maintenance cost and meanwhile to meet the strict international environment protective policy, and the economic benefit is obvious of the machine.
Injection Molding Machine